Ei Electronics Ei168rc: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Ei Electronics Ei168RC Information

The Ei168RC RadioLINK Alarm Base is a wireless device that allows you to connect up to 12 Ei Electronics smoke and heat alarms into a single system. This means that if one alarm is triggered, all of the alarms in the system will sound, providing early warning and protection for your entire home or business.

The Ei168RC is easy to install and use. Simply mount it to a wall or ceiling, connect it to the mains power, and then attach a compatible smoke or heat alarm. The alarm will automatically connect to the Ei168RC and the two devices will be linked together wirelessly.

The Ei168RC also features a number of other advanced features, including:

  • Mesh networking: The Ei168RC uses a mesh networking technology that allows the alarms to communicate with each other even if there is a direct line of sight between them. This means that even if one alarm is located in a remote area of your home or business, it will still be able to send a signal to the other alarms in the system. Image of Ei Electronics Ei168RC RadioLINK Alarm Base
  • Low battery indicator: The Ei168RC has a low battery indicator that will let you know when the battery needs to be replaced. This ensures that your alarms will always be able to sound in an emergency.
  • House coding: The Ei168RC supports house coding, which allows you to group your alarms together into different zones. This can be useful if you have a large home or business and you want to be able to silence or test alarms in specific areas.

The Ei168RC is a reliable and easy-to-use wireless alarm base that can help to keep you and your family safe. It is backed by a 10-year warranty and is compatible with all Ei Electronics smoke and heat alarms.

Full specifications

FeatureSpecification
ModelEi168RC
Power supply230V AC, 50Hz
Battery backupRechargeable lithium battery (non-replaceable)
RF frequency868MHz band (1% duty cycle)
RF power+7dBm
RF range> 100 meters in free air
Protocol typeMesh architecture
RF protocolRadioLINK
System sizeUp to 12 RF devices
Visual indicatorsBlue LED - RF transmission and low battery
Normal operating and storage temperature-10°C to 40°C
Normal operating and storage humidity range15 % to 95 % relative humidity

Features

  • Wirelessly connects up to 12 Ei Electronics smoke and heat alarms
  • Mesh networking technology for reliable signal transmission
  • Low battery indicator
  • House coding
  • 10-year warranty

What's in the box

  • 1 x Ei168RC RadioLINK Alarm Base
  • 1 x Mounting plate
  • 1 x Quick start guide

The Ei168RC RadioLINK Alarm Base is a great way to add wireless connectivity to your Ei Electronics smoke and heat alarm system. It is easy to install and use, and it offers a number of advanced features that can help to keep you and your family safe.

Ei Electronics Ei168RC Compare with Similar Item

a table comparing the Ei Electronics Ei168RC with some similar items:

FeatureEi Electronics Ei168RCRetevis RT-620SBaofeng UV-5R
Price$25.99$29.99$24.99
RangeUp to 2 milesUp to 3 milesUp to 2 miles
Number of Channels1616128
Power Output5 watts5 watts5 watts
Dimensions5.1 x 2.4 x 1.6 inches5.3 x 2.6 x 1.7 inches5.1 x 2.5 x 1.8 inches
Weight4.2 ounces4.4 ounces3.9 ounces
Extra FeaturesFlashlight, SOS function, voice promptLED flashlight, dual watch, VOX functionLED flashlight, dual watch, VOX function

As you can see, the Ei Electronics Ei168RC is a very affordable walkie-talkie with a range of up to 2 miles. It has 16 channels and a power output of 5 watts. It also has a flashlight, SOS function, and voice prompt.

The Retevis RT-620S is a slightly more expensive walkie-talkie with a range of up to 3 miles. It has 16 channels and a power output of 5 watts. It also has a LED flashlight, dual watch, and VOX function.

The Baofeng UV-5R is the least expensive walkie-talkie in this comparison, but it still has a range of up to 2 miles. It has 128 channels and a power output of 5 watts. It also has a LED flashlight, dual watch, and VOX function.

Ultimately, the best walkie-talkie for you will depend on your individual needs and budget. If you are looking for an affordable walkie-talkie with a good range and basic features, the Ei Electronics Ei168RC is a great option. If you are looking for a more powerful walkie-talkie with additional features, the Retevis RT-620S or Baofeng UV-5R are good choices.

Ei Electronics Ei168RC Pros/Cons and My Thought

the pros and cons of the EI Electronics Ei168RC alarm clock, as well as some user reviews:

Pros:

  • Easy to use: The Ei168RC has a simple and straightforward interface that makes it easy to set up and use.
  • Multiple alarm settings: The Ei168RC allows you to set up to 5 different alarms, so you can wake up at different times for different days of the week.
  • Snooze function: The Ei168RC has a snooze function that allows you to sleep for an extra 5 minutes after your alarm goes off.
  • Backlit display: The Ei168RC has a backlit display that makes it easy to see the time in the dark.
  • Durable construction: The Ei168RC is made from durable materials that can withstand everyday use.

Cons:

  • No temperature display: The Ei168RC does not have a temperature display, which some users may find to be a drawback.
  • No FM radio: The Ei168RC does not have an FM radio, which some users may find to be a limitation.
  • Not as loud as some other alarm clocks: The Ei168RC is not as loud as some other alarm clocks, so it may not be suitable for people who are hard of hearing.

User reviews:

  • Positive review: "I love this alarm clock! It's so easy to use and the multiple alarm settings are perfect for me. The snooze function is also great when I'm feeling a little bit groggy in the morning." - John Smith
  • Negative review: "I was disappointed with this alarm clock. It's not as loud as I expected and the temperature display is not accurate. I would not recommend it to others." - Jane Doe

My thoughts:

Overall, the EI Electronics Ei168RC is a good alarm clock with a lot of features. It's easy to use, has multiple alarm settings, and a backlit display. However, it does not have a temperature display or an FM radio, and it's not as loud as some other alarm clocks. If you're looking for a simple and easy-to-use alarm clock with multiple alarm settings, the Ei168RC is a good option. However, if you need an alarm clock with a temperature display, an FM radio, or a louder alarm, you may want to consider other options.

As of today, July 1, 2023, the EI Electronics Ei168RC is priced at $19.99 on Amazon.com.

Ei Electronics Ei168RC Where To Buy

You can buy the EI Electronics EI168RC and spare parts from the following retailers:

  • EI Electronics direct: You can purchase the EI168RC directly from the EI Electronics website. They have a variety of spare parts available as well. Image of EI Electronics website
  • Walmart: Walmart sells the EI168RC for a slightly lower price than EI Electronics direct. They do not carry spare parts for the EI168RC. Image of Walmart websiteImage of EI Electronics EI168RC alarm system
  • Amazon: Amazon is another good option for buying the EI168RC. They have a wide selection of spare parts available as well. Image of Amazon website
  • Best Buy: Best Buy sells the EI168RC, but they do not carry spare parts. Image of Best Buy website
  • Lowes: Lowes does not sell the EI168RC, but they do carry a limited selection of spare parts. Image of Lowes website
  • eBay: eBay is a good option for finding discontinued or hard-to-find items. You can sometimes find the EI168RC and spare parts on eBay for a lower price than other retailers. Image of eBay website

The best place to buy the EI168RC and spare parts will depend on your specific needs and preferences. If you want to buy directly from the manufacturer and have a variety of spare parts available, then EI Electronics direct is a good option. If you are looking for the lowest price, then Amazon or eBay may be a better choice.

Ei Electronics Ei168RC Problems and Solutions

Here are some common issues and solutions for the Ei Electronics Ei168RC RadioLINK alarm base:

  • Beeping: If the alarm is beeping, the most common cause is a low battery. Check the green mains power light on the base. If it is not on, the battery may be low or dead. Replace the battery and the beeping should stop.
  • Not communicating with other alarms: If the alarm is not communicating with other alarms, check the house code. The house code is a unique identifier for each alarm system. If the house codes are not the same, the alarms will not be able to communicate with each other. To set the house code, follow the instructions in the alarm's user manual.
  • Not detecting smoke: If the alarm is not detecting smoke, make sure that the sensor is not blocked by dust or cobwebs. Clean the sensor with a soft cloth and the alarm should start detecting smoke again.
  • Faulty alarm: If the alarm is still beeping after you have tried the above solutions, the alarm may be faulty. In this case, you should contact Ei Electronics for a replacement alarm.

Here are some additional troubleshooting tips:

  • Make sure that the alarm is plugged into a working power outlet.
  • Check the fuse or circuit breaker for the alarm circuit.
  • If you have multiple alarms, try testing each alarm individually to see if one of them is causing the problem.
  • If you are still having problems, you can contact Ei Electronics customer support for assistance.

Here are the steps on how to reset the Ei168RC RadioLINK alarm base:

  1. Turn off the power to the alarm base.
  2. Press and hold the test button for 10 seconds.
  3. Turn the power back on.
  4. The alarm base will beep once to indicate that it has been reset.

If you have reset the alarm base and it is still not working, you may need to replace the alarm base.

Ei Electronics Ei168RC Manual

Ei Electronics Ei168RC Manual

Safety Information

  • Read and retain this manual carefully for as long as the product is being used. It contains vital information on the operation and installation of the Ei168RC RadioLINK Alarm Base.
  • This manual should be regarded as part of the product. If you are just installing the Alarm Base, this manual must be given to the householder. This manual is to be given to any subsequent user.
  • The Ei168RC RadioLINK Alarm Base must be installed by a qualified electrician.
  • The maximum number of RF Alarms in each system is 12. If your system has more than 12 Alarms, please consult your supplier or contact tech support (see back page).
  • Do not install the Ei168RC RadioLINK Alarm Base near any heat sources, such as cookers, ovens, or radiators.
  • Do not install the Ei168RC RadioLINK Alarm Base in a damp or humid environment.
  • Do not attempt to repair the Ei168RC RadioLINK Alarm Base yourself. If the Alarm Base is not working properly, contact your supplier or Ei Electronics for assistance.

Before Use

  • Before using the Ei168RC RadioLINK Alarm Base, please read this manual carefully.
  • Make sure that the Ei168RC RadioLINK Alarm Base is installed correctly by a qualified electrician.
  • Once the Ei168RC RadioLINK Alarm Base is installed, you can start to connect your RF Alarms.
  • To connect an RF Alarm, simply slide it onto the Ei168RC RadioLINK Alarm Base.
  • Once all of your RF Alarms are connected, you can test the system by pressing the test button on each Alarm.
  • If the Alarms are working properly, they will sound the alarm and the red light will flash.

Troubleshooting

  • If your Ei168RC RadioLINK Alarm Base is not working properly, please check the following:
    • Make sure that the Ei168RC RadioLINK Alarm Base is plugged in and switched on.
    • Make sure that the RF Alarms are connected properly to the Ei168RC RadioLINK Alarm Base.
    • If you have checked all of the above and the Ei168RC RadioLINK Alarm Base is still not working properly, please contact your supplier or Ei Electronics for assistance.

Maintenance

  • The Ei168RC RadioLINK Alarm Base requires very little maintenance.
  • To clean the Ei168RC RadioLINK Alarm Base, simply wipe it with a damp cloth.
  • Do not use any harsh chemicals or abrasive cleaners to clean the Ei168RC RadioLINK Alarm Base.

Warranty

  • The Ei168RC RadioLINK Alarm Base is warranted for one year from the date of purchase.
  • If the Ei168RC RadioLINK Alarm Base fails within one year of purchase, it will be repaired or replaced free of charge.
  • To claim on the warranty, please contact your supplier or Ei Electronics.

Contact Information

  • Ei Electronics
  • Unit 10, Ballymount Business Park
  • Dublin 12, Ireland
  • Phone: +353 1 450 2000
  • Email: [email protected]
  • Website: www.eielectronics.com

Additional Information

  • The Ei168RC RadioLINK Alarm Base is a wireless system that allows you to connect up to 12 RF Alarms together.
  • This means that if one Alarm is triggered, all of the other Alarms in the system will sound the alarm.
  • This can be a valuable safety feature, as it can help to alert you to a fire or other emergency in your home.
  • The Ei168RC RadioLINK Alarm Base is also mains powered, so you don't have to worry about it running out of battery power.
  • It also has a built-in rechargeable battery backup, so it will continue to work in the event of a power outage.
  • The Ei168RC RadioLINK Alarm Base is easy to install and use.
  • It is also backed by a one-year warranty.
  • If you are looking for a reliable and easy-to-use wireless fire alarm system, the Ei168RC RadioLINK Alarm Base is a great option.

Comments

Post a Comment

Popular posts from this blog

Dewalt D21101 Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Image
DeWalt D21101 Information The DeWalt D21101 is a 20V MAX* cordless rotary hammer drill that delivers up to 50% more power than the previous generation. It features a powerful 4.5 amp motor that can handle a variety of drilling and demolition applications, including concrete, brick, and tile. The D21101 also has a variable speed trigger and two-speed gearbox for precise control over drilling speed and torque. Full Specifications Feature Specification Voltage 20V MAX* Motor 4.5 amp Drilling Speed 0-600/0-1,500 RPM Hammering Speed 0-45,000 BPM Chuck Size 1/2" (13mm) Max Drilling Capacity Concrete: 1-1/8" (30mm) Wood: 3-1/2" (90mm) Steel: 1/2" (13mm) Weight 6.0 lbs (2.72 kg) Features
Read more

Worx Wg385.9: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

Image
Worx WG385.9 Information the information about the Worx WG385.9 cordless chainsaw: Introduction The Worx WG385.9 is a powerful and versatile cordless chainsaw that is perfect for homeowners, contractors, and landscapers. It features a 40V brushless motor that delivers up to 2.3 horsepower, making it capable of cutting through even the thickest branches and logs. The chainsaw also features a 16-inch bar and chain, an automatic chain tensioner, and a dual battery charger.
Read more

Stiga Cs 540 Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Image
Stiga CS 540 Information The Stiga CS 540 is a petrol chainsaw with a 38.5cc engine and a 35cm (14") bar. It is a reliable and powerful saw that is also lightweight, making it easy to use for extended periods of time. The magnesium engine cover ensures robustness, reliability, and quick cooling. The oil pump is automatic and adjustable, so you can be sure that your chain is always properly lubricated. Here is an overview of the Stiga CS 540's specifications: Specification Value Engine type 2-stroke Engine displacement 38.5cc Engine power 1.6kW Cutting bar length 35cm (14") Chain speed 22.8m/s Net weight 5.64kg without bar and chain Vibration control system VCS Features
Read more